Custom Query (122 matches)
Results (28 - 30 of 122)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#77 | fixed | Viewer can't read log files | michaelhalloran | michelpons |
Description |
Using the same .NET Unit provided by CERE, using the same scenario in COFE and in Aspen Plus 7.2, that is drop the UO onto a flowsheet made of two streams, one defined, one undefined, then connect stream 1 to inlet port and stream 3 to outlet port, then exit, I get log files which are not readable by Viewer. Viewer says there is a problem reading both files and the window remains completely blank. |
|||
#78 | fixed | When UO logged no connection on ports | michaelhalloran | michelpons |
Description |
The PME used is Aspen Plus 7.2. The PMC used is a UO in .NET made by DTU/CERE. The scenario is to start from a Aspen Plus case where two streams are defined, one to serve as input, the other as output. Without COLTT enabled on the UO, it is possible to connect the defined stream to the UO inlet and to connect the other stream to the outlet port. The UO is then considered as valid and calculation may be launched. Calculation ends up with an error: the material flow in the outlet stream is way too large compared to the material flow in the inlet stream. That calls for a look with COLTT. When COLTT is enabled on the UO, it is impossible to connect streams to ports, so it is impossible to reach the point where the calculation is made. |
|||
#80 | worksforme | Viewer fails to initialize | michaelhalloran | michelpons |
Description |
I am considering a scenario that involves ProSim Plus 3.1 and a UO made in VB provided by an end-user. I have installed COLTT 1.08.05 Build May 30, 2011 in the machine and I have run the simulation where the UO is logged with COLTT. The logging works apparently fine but I can't get the Viewer to open up. I get a message box titled \"COLTTViewer.exe - Erreur d'application\" and the message is \"L'application n'a pas réussi à s'initialiser correctement (0xc0000135). Cliquez sur OK pour arrêter l'application\". |